Products Features
Industrial Oil
DESCRIPTION -
MINROL CUT-S forms a milky Emulsion with water & contains rust inhibitors to impart anti-rust, anti-corrosion properties and biocide to prevent bacterial growth in the emulsion. This oil has superior Cooling/Cutting with lubricating properties. which minimizes tool wear with excellent surface finish. MINROL CUT- S is normally used in concentration of 5-8 % and for grinding, more dilute emulsion could be used , For stable emulsion, oil should always be added to water with continuos stirring. MINROL CUT-S meets IS: 1115-1991 Specification (Reaffirmded-2002 with bacterial test ) & is recommended for a variety of cutting operations on ferrous & non-ferrous metals..
Specification
DESCRIPTION:- MINROL CUT-S forms a milky Emulsion with water & contains rust inhibitors to impart anti-rust, anti-corrosion properties and biocide to prevent bacterial growth in the emulsion. This oil has superior Cooling/Cutting with lubricating properties. which minimizes tool wear with excellent surface finish. MINROL CUT- S is normally used in concentration of 5-8 % and for grinding, more dilute emulsion could be used , For stable emulsion, oil should always be added to water with continuos stirring. MINROL CUT-S meets IS: 1115-1991 Specification (Reaffirmded-2002 with bacterial test ) & is recommended for a variety of cutting operations on ferrous & non-ferrous metals.
APPLICATION:-MINROL CUT-S used in grinding and Cutting operations on metals such as copper, bronze, steels etc.
GRADE- MINROL CUT-S
SPECIFICATION No.: IS: 1115-1991 ( Reaffirmed -2002 with bacterial test )
CHARACTERISTICS:-
|
S.N. |
Characteristics |
Value |
|
1. |
Ash , % , by mass (Max) |
3.5 |
|
2. |
Water,%,by mass (Max) |
10 |
|
3. |
Emulsion test 5:1 and 20:1 ratio in water |
0.1 ml oil & 0.2 ml Cream permitted |
|
4. |
Frothing test , 5 :1 and 20 :1 |
No froth after 15 min |
|
5. |
Cast iron corrosion test , 20:1 emulsion |
0/1-1 |
|
6. |
Copper strip corrosion @ 1000C for 3 hours |
Not worse than no. 1 |
|
7. |
Thermal stability test |
Pass the test |
|
8. |
Flash point,00C,COC,(Min.) |
150 |
|
9. |
Kinematic Viscosity @ 400C , cSt |
20-30 |
|
10. |
Volatile matter at 1000C for 16 hrs, percent by mass, (Max.) |
20 |
|
10. |
Bactericidal test |
pass |